Where Should I Mount my Reflex Sight?

One of the most popular accessories for the AR (and other MSRs) is the red dot or reflex sight. And for good reason…they help you get on target quickly for accurate shot placement in competition and in self-defense and tactical situations. In fact, I’m betting it’s probably one of the first things you’re considering adding to your new build.

There are a lot of different reflex sights to choose from. But regardless, whether you decide to go with an open reflex sight or closed tube red dot sight, mounting either optic is the same.

Fortunately, reflex sights don’t require much of a learning curve to master. They don’t magnify, so there’s no adjusting for distance. It’s pretty much mount, zero and go.

Ightmark Wolverine red dot sight and new XT-3 Tactical Magnifier
The SIghtmark Wolverine red dot sight and new XT-3 Tactical Magnifier are a great combo.

Unlike traditional riflescopes, reflex sights have an unlimited eye relief, so there is no right or wrong place to mount your sight. Further, your target and your dot stay the same size no matter where you put your sight on your rifle. Technically, you can put it anywhere along the rail your little heart desires. With that being said, most people strongly suggest you keep it mounted on the receiver part of the rail and not the handguard part of the rail. Now, there are placements that might raise a few eyebrows—like as close to the barrel as possible—but don’t worry, you aren’t going to look like a tool even if your sight is in the most extreme-forward position. As Ryan Gresham points out the video below, Scout rifle (without free-float rails) shooters prefer this position.

Even though I say there is no right or wrong answer to this question, you will find that a little further back than center is the most common placement of a reflex sight. Seems like for most, the sweet spot is above the ejection port. Why is this? The further away from the stock, the less balanced the rifle feels and the more likely your sight won’t stay zeroed.

There are advantages to both forward and backward positioning of your reflex sight. Forward is closest to the muzzle, while backward is closest to your face.

The further away from your eye you mount your sight, the smaller the window appears. This might make it more difficult to find the illuminated red dot reticle. (Like everything in the gun industry, though, some will argue the opposite.) However, you will be able to see way more of your surroundings allowing you to retain a high level of situational awareness and see more potential threats. The closer you mount your red dot to your eye, the wider field of view your optic provides but you lose the situational awareness.

Or, if you have a magnifier, you will need to mount your reflex sight forward enough to leave room for the magnifier.

Ryan Gresham from Gun Talk explains red dot mounting in the video below.

 

At the end of the day, it is what makes you the most comfortable, confident and accurate. Experiment with different placement and you’ll find the best mounting position for you.

Do you already have a reflex sight? Tell us where you have it mounted in the comment section.
Click here to Shop Sightmark reflex sights.
Previous
Sightmark M-Spec Mini Red Dot Sight Review
POSTED BY Tyler Cullop ·
Read more
Next
Cant IS a Word in Long Range Shooting
POSTED BY Tyler Cullop ·
Read more

2 comments

I just recently purchased another AR and a red dot or reflex sight never used them before always a scope or iron sights but anyway I put mine at the end of the rail close to the end of the barrel I think that’s the best way for me I can see the whole picture and you only need to see the dot on your target but I will try back towards the receiver and I will let you know how it goes both ways thank you

Kevin

I have my red dots mounted over the ejection ports of my two m4 rifles. I have an AK variant coming soon and will most likely mount it in the same area. I position optics by sliding them up and down the rail until I get the best picture with both eyes open, just happens to be in the area over the ejection port with where my adjustable stocks are positioned.

Derek

Leave a comment

Please note, comments need to be approved before they are published.